Sales PortalSpecification SheetsCross-ReferenceRFQ BuilderDownloads & Catalogs
+86 159 5875 8125|
Get a Quote
TM-3Specification sheetWall SwitchesUL 20

15A 125V 4-Way Toggle Switch

15A 125V 4-Way Toggle Switch
Catalogue SKUTM-3
Product familyWall Switches
Published fields31 fields held for this model
ColoursWhite · Black · Ivory · Almond · Grey · Brown · Graphite
ListingUL & cUL listed — the file number is supplied with the quotation and verifiable in UL Product iQ
Full product page/products/wall-switches/tm-3/
Electrical
Voltage125V AC
Amperage15A
Construction
MaterialThermoplastic
ColorsWhite, Black, Ivory, Almond, Grey, Brown, Graphite
ColorWhite, Black, Ivory, Almond, Grey, Brown, Graphite
FinishStandard smooth thermoplastic finish
Face MaterialThermoplastic
Body MaterialThermoplastic
Wiring
Terminal LayoutFour traveler terminals and grounding connection; no common terminal
Application
Control LocationsThree or more locations when used with two 3-way switches
Application SectorMulti-story stairways, long corridors, large rooms with multiple entrances, custom homes, property retrofits, and light commercial replacement projects
Marking & standard
Product CodeTM-3
Applicable StandardUL 20
Face MarkingNo ON/OFF marking
Certified SafetyUL/cUL listing
UL File NumberE327438
Other
0Product Code
Switch Type4-Way Toggle Switch
Wiring MethodSide wire, back wire, push-in
GroundingSelf-grounding clip
Wall Plate IncludedNo
PackagingIndividual box
Not ForSingle-location switching, two-location switching without a 4-way position, dimming control, smart control, timer control, or wet-location applications unless a different listed device is selected
Product Type4-way toggle switch
Switch FunctionExtends one light or one load to three or more control locations when installed between two 3-way switches
Pole4-way
Switch StyleTraditional toggle actuator
Features15A 125V 4-way control, intermediate switch function, no common terminal, self-grounding clip, seven color options, individual box packaging
Required Circuit PositionInstalled between two 3-way switches in a multi-location switch circuit
Neutral RequiredNo neutral termination for a standard mechanical 4-way switch unless product instructions or another device type requires it
Country of OriginChina
Packaging
LevelThis family's default
Individual packagingNo individual retail box by default
Inner carton20 devices
Master carton200 devices
Included with each deviceNo wall plate or instruction sheet

Pack counts are family defaults. Per-model carton counts and pack dimensions are still open on our side — ask for the count for this model when quoting.

Not published for this model

Other models in the wall switches family carry these fields; this one does not. We list them rather than leave a blank row that could be read as a specification.

  • Break-Off Fin
  • Control Layout
  • Control Location
  • Feed Configuration
  • Gang Requirement
  • Motor or Fan Load Rating
  • Motor or Heater Load Rating
  • Wallplate Compatibility
Installation

Installation steps held for TM-3

Taken from the manufacturer installation data for this model. Local code editions still govern where the device may be used.

Power Off & Verify the Circuit

Turn off the breaker and confirm all switch boxes in the circuit are de-energized with a voltage tester or multimeter.

Confirm the 4-Way Position

Verify that this switch box sits between the two 3-way switches. Do not use a 4-way switch as the first or last device in the switching circuit.

Identify Traveler Pairs

Before disconnecting the old device, label the two traveler wires coming from one 3-way switch and the two traveler wires going to the other 3-way switch.

Connect Travelers and Ground

Connect each traveler pair to the matched terminal pair shown on the 4-way switch body, then connect the bare copper or green grounding conductor to the green grounding terminal.

Mount & Test All Locations

Fold wires neatly into the box, mount the switch, install the wallplate if required, restore power, and confirm that every switch location can turn the connected light or load on and off.

A video of this model being wired is available on the product page:open TM-3.

Request a quote

Send the list, get the package back

Model list, quantities and project type is all we need to start. The quotation comes back in one business day with the specification sheet for each line item, the listing reference it holds and the packing detail for the DC — one document, not four.

Prefer email? sales@syoutlet.com

Reply in 1 business day · no minimum quoted, MOQ follows the container you book