Sales PortalSpecification SheetsCross-ReferenceRFQ BuilderDownloads & Catalogs
+86 159 5875 8125|
Get a Quote
TM-2Specification sheetWall SwitchesUL 20

15A 125V 3-Way Toggle Switch

15A 125V 3-Way Toggle Switch
Catalogue SKUTM-2
Product familyWall Switches
Published fields30 fields held for this model
ColoursWhite · Black · Ivory · Almond · Grey · Brown · Graphite
ListingUL & cUL listed — the file number is supplied with the quotation and verifiable in UL Product iQ
Full product page/products/wall-switches/tm-2/
Electrical
Voltage125V AC
Amperage15A
Construction
MaterialThermoplastic
ColorsWhite, Black, Ivory, Almond, Grey, Brown, Graphite
ColorWhite, Black, Ivory, Almond, Grey, Brown, Graphite
FinishStandard smooth thermoplastic finish
Face MaterialThermoplastic
Body MaterialThermoplastic
Wiring
Terminal LayoutCommon terminal, traveler terminals, and grounding connection for 3-way switch circuits
Application
Control LocationTwo locations
Application SectorStairways, long hallways, rooms with two entrances, apartment retrofits, residential lighting circuits, and light commercial replacement projects
Marking & standard
Product CodeTM-2
Applicable StandardUL 20
Face MarkingNo ON/OFF marking
Certified SafetyUL/cUL listing
UL File NumberE327438
Other
0Product Code
Switch Type3-Way Toggle Switch
Wiring MethodSide wire, back wire, push-in
GroundingSelf-grounding clip
Wall Plate IncludedNo
PackagingIndividual box
Not ForSingle pole circuits where a single pole switch is enough, 4-way circuits, dimming control, smart control, timer control, or wet-location applications unless a different listed device is selected
Product Type3-way toggle switch
Switch FunctionControls one light or one load from two locations when used in a proper 3-way circuit
Pole3-way
Switch StyleTraditional toggle actuator
Features15A 125V 3-way control, blank toggle face, self-grounding clip, seven color options, individual box packaging
Neutral RequiredNo neutral termination for a standard mechanical 3-way switch unless product instructions or another device type requires it
Country of OriginChina
Packaging
LevelThis family's default
Individual packagingNo individual retail box by default
Inner carton20 devices
Master carton200 devices
Included with each deviceNo wall plate or instruction sheet

Pack counts are family defaults. Per-model carton counts and pack dimensions are still open on our side — ask for the count for this model when quoting.

Not published for this model

Other models in the wall switches family carry these fields; this one does not. We list them rather than leave a blank row that could be read as a specification.

  • Break-Off Fin
  • Control Layout
  • Control Locations
  • Feed Configuration
  • Gang Requirement
  • Motor or Fan Load Rating
  • Motor or Heater Load Rating
  • Required Circuit Position
  • Wallplate Compatibility
Installation

Installation steps held for TM-2

Taken from the manufacturer installation data for this model. Local code editions still govern where the device may be used.

Power Off & Identify the Circuit

Turn off the breaker and confirm both switch boxes are de-energized with a voltage tester or multimeter. Verify that the load is controlled from two locations, not one.

Tag the Common Wire

Before removing the old switch, identify and label the wire connected to the common terminal. The common terminal is often darker or marked COM, but always follow the device marking.

Identify the Traveler Wires

Locate the two traveler conductors between the 3-way switches. Keep them separate from the common wire so the circuit is not rewired as a single pole switch by mistake.

Connect Common, Travelers, and Ground

Connect the tagged common wire to the common terminal, connect the two traveler wires to the traveler terminals, and connect the bare copper or green grounding conductor to the green grounding terminal.

Mount & Test Both Switches

Fold wires neatly into the boxes, mount the switches, install wallplates if required, restore power, and test that either switch can turn the connected light or load on and off.

A video of this model being wired is available on the product page:open TM-2.

Request a quote

Send the list, get the package back

Model list, quantities and project type is all we need to start. The quotation comes back in one business day with the specification sheet for each line item, the listing reference it holds and the packing detail for the DC — one document, not four.

Prefer email? sales@syoutlet.com

Reply in 1 business day · no minimum quoted, MOQ follows the container you book